24 kw .GENERATOR DE LA ENERGIA

Overview

• The video presents a 3-phase synchronous generator (no magnets mentioned) rated about 24 kW, ~350 V, operating originally at 1500 RPM and 3-phase.
• A key goal is enabling power generation at lower speed.

Main Modification

• The generator’s stator has been changed, so it can start producing power at ~750 RPM instead of requiring 1500 RPM.

Demonstration Concept / How It’s Started

• A motor (~4 kW) is used to help start the system.
• Power is converted from 3-phase to single-phase (1-ph) via a mechanism that includes a VFD (variable frequency drive) set to ~25 Hz to drive the motor.
• Once the motor runs, the generator reaches ~750–780 RPM, at which point it begins producing electricity.

Measurements and Observations Shown

• Voltage meters display three-phase and single-phase outputs.
• The generator is shown operating under specific output conditions, with subtitles mentioning approximately ~28 frequencies and showing power/voltage/current readings.
• The system’s consumption is stated on the order of ~4 amps at ~220 V (from subtitles).

Practical Use Case Highlighted

• Because it can generate from lower RPM, the generator can be used with energy systems that don’t spin fast, such as:
  • Wind turbines
  • Hydro turbines (also referenced as “hyro turbines”)
• In these applications, the turbine RPM may be closer to ~750 RPM rather than 1500 RPM.

Key Claims / Emphasis

The speaker emphasizes that the modification was specifically made to enable low-RPM operation, and that the resulting generator is ready for real use.

• Claim: it is a synchronous generator without magnets, achieved through stator modification.

Sources / Speakers

• One speaker/host is shown in the subtitles, describing the generator and the demonstration.
• No named individuals are provided.