Safety Orientation DVD English

Summary

The video presents a general workplace safety orientation. Its central message is to stay alert, follow procedures, use appropriate protective equipment, and get additional training for hazards specific to your job.

Key Safety Practices

• Build a positive safety attitude: Stay focused and alert, look for hazards, follow safety rules even when they take longer, and take responsibility for your safety and that of your coworkers. Avoid shortcuts and working while distracted or fatigued.
• Prevent slips, trips, and falls:
  • Mark and clean spills promptly, and wear slip-resistant footwear where appropriate.
  • Keep walkways clear and well lit. Secure or reroute cables, and repair loose or uneven flooring.
  • Use and inspect ladders and scaffolding correctly, and use fall protection where needed. Don’t stand on chairs or other unsuitable objects.
• Reduce musculoskeletal strain: Change positions, take breaks to stand and stretch, and avoid prolonged repetitive or awkward postures when possible.
• Lift and carry safely: Plan the route and destination, test the load, and get help or use a mechanical aid if it is too heavy. Stand close, bend at the hips and knees, keep your back straight and the load near your body, and lift with your legs. Turn by moving your feet rather than twisting, and bend your knees to lower the load.
• Use and maintain PPE: Choose equipment suited to the hazard, make sure it fits, and learn how to use it. Inspect it before and after use, clean it, store it properly, and discard single-use items appropriately. Examples include task-appropriate gloves, hard hats, eye protection, protective clothing, safety footwear, hearing protection, and respirators.
• Handle chemicals carefully: Read the label before use, wear the required PPE, and consult the chemical’s Safety Data Sheet (SDS), which should be accessible at the worksite. Ask a supervisor if anything is unclear, and learn the relevant emergency procedures.
• Work safely around electricity: Check cords and equipment for damage, and report problems. Keep electrical equipment away from water and heat. Don’t run cords across walkways, under rugs, or through doorways. Don’t use damaged outlets or equipment, and follow lockout/tagout procedures when repairing machinery.
• Prevent and respond to fires: Know your workplace fire plan, alarm and extinguisher locations, and evacuation procedures. Use the correct extinguisher for the fire type. If it is safe and appropriate to attempt to extinguish a small, contained fire, use PASS: pull the pin, aim at the base, squeeze, and sweep. The video’s “Four A’s” are:
  1. Activate the alarm.
  2. Assist others in exiting.
  3. Attempt to extinguish the fire only when safe.
  4. Assemble at the designated location.
• Prepare for first aid: Know where first-aid kits, eyewash stations, and emergency showers are located, and who is CPR-certified. For bleeding, use appropriate protective equipment and avoid contact with blood or bodily fluids. In an emergency, stay calm, call for help, provide the victim’s location and injury details, check breathing, and move the victim only if there is a potential danger.
• Report incidents and ask questions: Report every incident so it can be investigated and future accidents may be prevented. Ask a supervisor about unfamiliar equipment or procedures, and take safety training seriously.

The video emphasizes that this is an overview, not a substitute for detailed, workplace-specific safety training.

Presenters and Sources

• Presenter: Not identified in the subtitles.
• Source: Safety Orientation DVD English (Ron’s Staffing Services).